ECT’s Intermittent or skip Bonded tubing is a two-tube bonded configuration. The tubes are color-coded to prevent line crossing and make for easier identification.
The durable and lightweight properties all make bonded tubing an ideal choice for a wide spectrum of uses including environmental water sampling, well testing, remediation, and monitoring equipment. ECT’s Bonded tubing is the leading choice for bladder pump sample tubing.
What is a skip-bond? A: The bond between the two tubes runs every other 6″. This means there is a 6″ gap between the bond lines where no bond has taken place. This reduces the need for separation or splitting back the tubes wherever a cut is needed. by using the skip section of tubing, you ensure a tight seal between compression fittings because there will not be any weld residue in that section.
Specifications
Tubing A:
Tubing Material: Polyethylene
Tubing Type: High Density / HDPE
Tubing Color: Natural
Inside Diameter: .17″ or 11/64″
Outside Diameter: .25″ or 1/4″
Wall Thickness: .040″
Length: 500′
Max Pressure: 260 PSI at 72°F
Temp Range: -93°F – +184°F
Hardness, Shore D: 69
Tensile Strength: 4,600 PSI
Tubing B:
Tubing Material: Polyethylene
Tubing Type: High Density / HDPE
Tubing Color: Blue
Inside Diameter: .17″ or 11/64″
Outside Diameter: .25″ or 1/4″
Wall Thickness: .040″
Length: Various
Max Pressure: 260 PSI at 72°F
Temp Range: -93°F – +184°F
Hardness, Shore D: 69
Tensile Strength: 4,600 PSI
Applications
Groundwater monitoring
Bladder pump sampling
Nested vapor lines
Air sampling tubes
Laboratory applications
Water processing
PFAS and PFOA Testing Approved
Note: Additional fractional and metric sizes, custom colors and cut lengths are available and quoted upon request.
