ECT’s Intermittent or skip Bonded tubing is a two-tube bonded configuration. The tubes are color-coded to prevent line crossing and make for easier identification.
The durable and lightweight properties all make bonded tubing an ideal choice for a wide spectrum of uses including environmental water sampling, well testing, remediation, and monitoring equipment. ECT’s Bonded tubing is the leading choice for bladder pump sample tubing.
What is a skip-bond? Also known as an Intermittent Bond, the bond between the two tubes is permanent, but every 6″ there is a 6″ gap where no bond has taken place, thus there is no need for separation or splitting back the tubes wherever a cut is needed. This is ideal when using compression fittings to guarantee a leak proof seal. Also eliminates scrap for cutting different lengths from large spools of bonded tubing.
Specifications
Tubing A:
Tubing Material: Polyethylene
Tubing Type: High Density / HDPE
Tubing Color: Natural
Inside Diameter: .17″ or 11/64″
Outside Diameter: .25″ or 1/4″
Wall Thickness: .040″
Length: 500′
Max Pressure: 260 PSI at 72°F
Temp Range: -93°F – +184°F
Hardness, Shore D: 69
Tensile Strength: 4,600 PSI
Tubing B:
Tubing Material: Polyethylene
Tubing Type: High Density / HDPE
Tubing Color: Blue
Inside Diameter: .17″ or 11/64″
Outside Diameter: .25″ or 1/4″
Wall Thickness: .040″
Length: Various
Max Pressure: 260 PSI at 72°F
Temp Range: -93°F – +184°F
Hardness, Shore D: 69
Tensile Strength: 4,600 PSI
Applications
Groundwater monitoring
Bladder pump sampling
Nested vapor lines
Air sampling tubes
Laboratory applications
Water processing
PFAS and PFOA Testing Approved
