The BMPro SmartSENSE Propane Tank Gas Level Indicator from Nomadic Supply Company® is a premium-quality product engineered for reliable performance in demanding off-road, overland, and mobile living applications.
SmartConnect is a range of RV Bluetooth sensors that can be paired to most BMPRO Smart RV Systems to monitor various features, functions, and equipment including temperatures, tire pressures, LPG levels, and more.
With the BMPro SmartSENSE Gas Bottle Level Monitor from Nomadic Supply Company® you can simply download the SmartSense app, synchronize the sensor, and attach it to the bottom of a gas cylinder. Now you can get an exact tank level – right on your smartphone!
Use your smartphone to monitor as many gas bottles as you want, and never run out of gas unexpectedly.
Nomads running their heaters and fridges on gas; café owners using outdoor gas heaters; BBQ lovers and everybody else using liquified gas will find this app to be highly useful and convenient. No more warm water testing, weighing gas bottles, or fortune-telling – you’ve got an app for that!
The BMPro SmartSENSE Gas Bottle Level Monitor has a standard non-rechargeable 3V round battery CR2032. SmartSense app works on all devices that have Bluetooth 4.0 + Low Energy (BLE).
BMPro SmartSENSE Propane Tank Gas Level Indicator Features:
- Compact, lightweight, tough, water and dust resistant
- Suits most portable domestic gas bottles
- Communicates with smartphones via Bluetooth
- Free SmartSense app via Google Play and iTunes App Store
- Can be used via JHub and Odyssey apps
- Easy DIY installation with extra strong magnets
- Compatible with BMPRO Smart RV systems JHub, Odyssey, JAYCOMMAND, RVMASTER
BMPro SmartSENSE Propane Tank Gas Level Indicator FAQs:
Can I replace the battery?
Yes, you can. Using a small screwdriver, lift the lid which is held by the snap fit. Lift the board with electronics carefully and replace the battery. Place electronics board back into base. Pay attention to wire routing so that wires do not get pinched when lid is reassembled. Also check that the enclosure seal is properly seated into the base. Place the lid back and press to secure all four snap fits.
How long will the battery last?
One year on average depending on the operating temperatures. The battery will typically last longer in warmer environments.
SmartSense not working or not pairing
step one – The SmartSense may still be in factory mode – press the orange button 5-6 times
step two – ensure Bluetooth and Location services are both activated on your phone
step three – retry pairing by press and hold sync button to enable SmartSense app to detect unit
Will SmartSense work with a 45kg gas cylinder?
No, SmartSense sensor will not work with a 45kg gas cylinder.
This is due to the thicker steel that is used, which can affect sensor readings.
How does SmartSense measure the gas levels inside a gas bottle?
SmartSense sensors utilise ultrasonic technology to measure the gas levels.
It then transmits this information to your device via Bluetooth.
Is the magnet strong enough to leave on a caravan gas bottle full time?
Yes, SmartSense is equipped with two super strong magnets holding the sensor in place on the gas bottle when travelling in a RV.
Is there a reason the default cylinder volumes are 8.5kg and 3.7kg, rather than 9kg and 4kg as these are the standard gas bottle sizes?
The filling of nominal 9kg bottles with 8.5kg of gas was a safety initiative of the Australian LPG industry. The same is true of 4kg bottles being filled with 3.7kg of gas.
How do I install SmartSense and pair it with my phone?
Ensure the base of your propane gas tank is clean. Remove any debris, excess paint or rust.
Open your app and navigate to the SmartSense screen.
Follow the instructions in the app to pair your SmartSense sensor.
On the SmartSense sensor, press the orange sync button. If this is the first time you are using the sensor, press the orange sync button six times to wake it from Sleep mode.
Using the supplied grease, apply a generous amount to the rubber pads on the back of the sensor.
Use the sensor’s magnets to attach the sensor to the bottom of the tank. Make sure the rubber pad between the magnets makes good contact with the tank, and the sensor is in the centre of the tank.
Return the tank to it’s upright position. It might take a few minutes for the gas to settle and for readings to stabilize.
The sensor is now paired to the app and will show the current gas level of your tank.
BMPro SmartSENSE Propane Tank Gas Level Indicator Documents:
BMPro SmartSENSE Gas Bottle Level Monitor Owner’s Manual
| Weight | 0.14 lbs |
|---|---|
| Dimensions | 8.86 × 5.43 × 1.18 in |
No products in the cart.