The low amp draw, hardworking Poseidon® Plastic Pump fits into 2 inch schedule 40 and 80, and larger diameter wells.
The revolutionary Poseidon™ Remediation Pump is a 12-volt submersible pump that is designed for pumping tests or groundwater remediation. This pump is sized perfectly to fit into schedule 40 and 80 2-inch wells. This remediation pump features quick installation, easy operation and long life expectancy. Simple to install and operate: just clamp 3/8IN I.D. tubing to the pump and secure it with suspension rope or cable to the desired depth. You can power the pump with a deep cycle marine battery or one of our solar systems. You can also use the Poseidon 80 pump with the 110 volt Step Down Transformer.
Specifications
The Poseidon® Plastic Pump consists of 4 components: The 4 Pin Bayonet Motor Module Connector, Replaceable Motor Module, Outside PVC Housing with PVC Bottom Inlet Filter Screen (Assembled as One Unit), and the Pump Wire
POWER CONSUMPTION: 255 WATTS (MAX)
VOLT RECOMMENDATION: 12-15 DC (direct current) At Source
MAXIMUM AMP OUTPUT: 17 AMPS
MEASUREMENTS: LENGTH 7.5″ / DIAMETER: 1.82″
REQUIRED TUBING: 3/8″ ID X 1/2″ OD TUBING
SUPPLIED WITH: 90 FEET OF HEAVY DUTY 10 GAUGE WIRE WITH FLYING LEADS
PUMP CONSTRUCTION:: PVC, POLYPROPYLENE, AND STAINLESS STEEL
USE THE POSEIDON® 80 PLASTIC PUMP ONLY AT 40 feet DTW or deeper.
Failure to do so may damage motor modules and voids all manufacture warranties
| DTW (Depth to Water) | Gallons per Minute |
| 10 | DO NOT USE |
| 20 | DO NOT USE |
| 30 | DO NOT USE |
| 40 | 2.0 |
| 50 | 1.75 |
| 60 | 1.40 |
| 70 | 1.25 |
| 80 | 1.0 |
| 90 | N/A |
Test was conducted with a 12 volt deep cycle battery at 13.8 volts at battery terminals
No products in the cart.